Click image to view full size image
SLEEVE ANCHORS
1. Preassembled for quick and easy installation, can be used in thin sections of concrete or solid masonry.
2. Head styles for every application.
3. The test values listed were obtained using 246-281 kgf concrete (no aggregate). A safe working load should not exceed 25% of stated values.
Using a diameter which equals the anchor diameter, drill hole to min embedment
Drive the stem till washer is flush with mater to be fastened
Expand Anchor by tightening nutor or head 3 to 5 turn
Sleeve Anchor (AP2601)
